1080P 800M AI Full-Color Night Vision 20X Auto-Zoom Camera IP66 IP PTZ Camera
imaging technology, through the separation of noise and real signal from the very low light signal deep learning AI algorithm; in the noise reduction at the same time the real signal is enhanced to the normal light environment intensity, the signal to noise ratio is effectively improved to achieve normal imaging in the very low light environment.
Mainly used in urban high-altitude lookout, border and sea defense, sea chokepoints, road monitoring, maritime farming, parks, industrial parks and other places.
Mainly used in urban high-altitude lookout, border and sea defense, sea chokepoints, road monitoring, maritime farming, parks, industrial parks and other places.
| Model | SVN-20FX800AS2 |
| Sensor | 1/1.8" Progressive Scan CMOS |
| Pixels | 2.0MP |
| Minimum illumination | Color:0.0001Lux |
| Frame Rate | 10fps/30fps real time video |
| Lens focal length | F=6.8~120mm, 20x optical zoom |
| Lens aperture | F1.6-F4.1 |
| Horizontal field of view | 58.5°-3.7° |
| Recognition distance | 800M Full color night vision |
| Video Compression | H.265/H.264 |
| White balance | Automatic |
| Gain control | Automatic |
| Wide Dynamic | 120dB |
| Signal-to-noise ratio | 0.01 LUX: S/N ratio ≥ 30dB, 0.01 LUX: S/N ratio ≥ 20dB. |
| AI digital noise reduction | Support- |
| Exposure Mode | Automatic |
| Color reproduction | 0.01 LUX: ΔEab < 20, 0.001 LUX: ΔEab < 30 (frame rate ≥ 10fps) |
| Rotation speed | Horizontal 0.1 to 100°/S, vertical 0.1 to 50°/S |
| Positioning accuracy | 0.1°±50% |
| Preset | 255 |
| 3D function | Support frame enlargement, target locking field of view center function (optional) |
| Automatic cruise | Support focal length and head speed matching |
| Power failure memory | Support power-off state memory function, automatically return to the head and lens state before power-off after power on |
| Watch function |
On/Off, preset point/cruise scan can stay in idle state after specified time Automatic recall (including idle state entered after power-up) |
| Remote Upgrade | Support both movement and head remote upgrade (related to movement) |
| Real-time angle back transmission | Support real-time angle return or query angle return function |
| Information Display | Support |
| Angle control | Support |
| Smart Wiper | Remote intelligent control |
| Fan/Heating | Real-time temperature detection; low temperature start, pure physical detection |
| Waterproof respirator | Built-in 2 waterproof respirators to reduce fogging and condensation |
| Communication Baud Rate | 2400/4800/9600/19200bps |
| Communication Interface | RS485+RS232 |
| Communication protocols | PELCO+VISCA |
| Network Protocols | IPv4/IPv6,HTTP,DNS,NTP,RTSP,RTCP,RTP,TCP/IP,UDP,DHCP |
| Access Protocol | ONVIF/GB28181 |
| Network Interface | RJ4510/100Base-T |
| Audio Interface | 1-channel audio input, 1-channel audio output (optional) |
| Alarm interface | 2-channel alarm input/2-channel relay output (optional) |
| Analog video interface | Not supported |
| External 485 interface | Support adaptive Pelco-P, Pelco-D and other protocols |
| Ground Line | Grounded all the way |
| Power supply | DC/AC24V/3.0A |
| Power consumption | <90W( Low temperature start) |
| Working environment temperature | -40ºC~60ºC |
| Humidity of working environment | 0~95% (non-condensing) |
| Protection level | IP66, built-in 4000V lightning, surge and surge protection |
| Dimension | L355mm×W204mm×H443mm |
| Product weight | ≤9kg |
| Load weight |
≤4kg (including movement shield) |
