52X 1080P Ship-Mounted IP66 Outdoor Optical Thermal Imaging IP66 Outdoor Security Network IP PTZ Camera
Specification
| Physical characteristics | |
| Use environment | Out door |
| Installation method | Flat base mounting, base with shock absorber |
| Power supply | AC24V±10% 10A |
| Total Power | ≤150W, including heater ≤350W |
| Temperature and humidity | # -40ºC~65ºC(Except frozen, power-on state below 0 degrees); 35%~90%(relative humidity) |
| Dust-proof and water-proof | IP66, Anti-corrosion coating, anti-salt spray at PH6.5-7.2,continuous spraying for 24hous |
| Heavy | 35Kg(around) |
| Size | 560(L)*335(W)*335(H)mm |
| Day Camera | |
| Sensor | 1/1.8"CMOS, HIS 3519 + SONY IMX344 |
| Pixel | HD 4K Video Compression |
| Video Compression format | H.265/H.264/MJPEG |
| Minimum illumination | 0.001Lux F1.2(night); 0.01Lux F1.2(Day) |
| Color B/W Conversion | Day/night automatic conversion, ICR mechanical dual filter switching, ecternal control |
| BLC | Auto |
| Gain control | Auto |
| White balance | Manual/Auto |
| Strong light suppression | support |
| IRIS adjustment | Support auto Lrls, manually adjust Lris |
| Len focal length | 5.7-300 |
| Lens contro | Electric zoom |
| Focus mode | Auto Focus/One Focus/Manual Focus |
| Optical zoom | 52X |
| Digital zoom | 16X |
| Penetrating fog | support |
| Others | Penetrating fog imaging, day and night infrared correction 400-1100nm, with lens preset |
| Interface Protocol | ONVif GB28181 |
| Thermal imaging Camera | |
| Sensor | Vanadium Oxide uncooled Infrared focal plane detector |
| Detector type | Alarm type uncooled |
| Pixel | 640*512, 384*288 |
| Pixel spacing | 17um |
| Wave response | 8-14um |
| Detector frequency | 50HZ |
| Len F value | F1.0-F1.2 |
| Optical zoom | 5X; focal length:30-150mm |
| Digital zoom | 8X, 1.0-8.0 continuous zoom |
| Field of view | 4.2°-3.3°~20.6°-16.5° |
| focusing | Electric continuous focusing |
| Len auto focus | Far and near targets can be outomatically focused |
| Alarm | Realize image mark alarm, serial communication alaarm,IO alarm |
| Alarm Reaction | ≤0.25 |
| Polarity | Black hot/white hot |
| Pseudo-colot | support |
| Image Processing | Image detall Enhancement(DDE), Automatic Gain Control(AGC),Digital Fillter Noise Reduction |
| Brightness contrast adjustment | Manual / Auto |
| Analog Video output | 1CH PAL system |
| Digital video output | D10-bit or 14-bit LVDS-H/F, 10-bit or 14-bit LVCMOS, BT.656, BT.1120 |
| Control interface | RS-232/RS485/UART/RS-422 |
